The ventilation requirement must be met and safeguarded to achieve a good indoor climate. Energy consumption is also a parameter that is affected by the solution. Swegon provides a comprehensive range of damper and measurement units that make it possible to measure, regulate and create a solution based on demand with low energy consumption.

Installation and commissioning are simple as all products in the REACT family can be set and read via the display on the product.

The REACT family has been expanded with pressure control, improved performance (improved measurement and interference management and a higher corrosivity class) and simplified product range (analog and Modbus in the same product).

An overview of the design, type of control and the functions provided by the REACT family are present below.

For product data, tables and details click to go to each product page further down.

Design	REACT M	REACT P	REACT P-X	REACT V
Circular design
Circular connections: Ø100–630 mm
Rectangular design
Rectangular connections: 200×200 – 1400×700 mm
Spring return type motor as an option
Regulation
Pressure regulation
Variable flow regulation
Constant flow regulation
Function
Measures air flow
Measures pressure
Analogue control or Modbus control
Quick readings via the controller display
Quick setting of parameters
Can be easily anti-condensation insulated in the duct system

What REACT would you choose?

Below you will find all REACT models in the family. Message us by using the contact form below if you’re interested in them and you’ll find PDFs for these at the bottom of this page.

 

REACT M

Stand-alone measurement unit to measure air flows.

REACT P

Pressure measurement up to 300 Pa recommended regulation range
20–290Pa.

 

REACT P-X

Pressure measurement up to 300 Pa recommended regulation range
20–290Pa.

 

REACT V

Variable flow or constant flow