vkm ec erp 2018 8005 Inline centrifugal fan with the air flow up to 345 m³/h in steel casing. EC-motors, high level of efficiency 100% speed controllable EC technology is intelligent technology; using integral electronic control which eliminates the slip losses in the motor and ensures that the motor always runs at optimal load. This guarantees that the proportion of energy utilized effectively is many times higher and the energy usage considerably lower compared with AC motors. EC fans are notable for their economical use of energy and excellent ease of control. They can be varied in speed to match the airflow demand, and operate at high efficiency levels. For the same air volume, they consume distinctly less energy than AC fan drives. Another special feature of EC fans is their energy-saving potential not only at full load, but especially at part-load. When operating at part-load, the energy used is much lower than with an asynchronous motor of equivalent output. Reduced energy usage guarantees a drop in operating costs.

VKM 100 EC

Inline centrifugal fan with the air flow up to 345 m³/h in steel casing.

  • EC-motors, high level of efficiency
  • 100% speed controllable

EC technology is intelligent technology; using integral electronic control which eliminates the slip losses in the motor and ensures that the motor always runs at optimal load.

This guarantees that the proportion of energy utilized effectively is many times higher and the energy usage considerably lower compared with AC motors.

EC fans are notable for their economical use of energy and excellent ease of control. They can be varied in speed to match the airflow demand, and operate at high efficiency levels. For the same air volume, they consume distinctly less energy than AC fan drives.

Another special feature of EC fans is their energy-saving potential not only at full load, but especially at part-load. When operating at part-load, the energy used is much lower than with an asynchronous motor of equivalent output.

Reduced energy usage guarantees a drop in operating costs.

Category

Description

APPLICATION

  • Supply and exhaust ventilation systems for commercial, office and other public or industrial premises.
  • EC motors applied in VKM fans reduce energy demand by about 35 % and ensure high aerodynamic performance and low noise level.
  • Such characteristics are of special importance for ventilation of public premises as banks, supermarkets, restaurants, hotels, installation close to residential buildings and for domestic application, e.g. ventilation of private pools.
  • EC motors enable integration of several fans into a unified networks and their centralized control.
  • The steel casing ensures reliable operation of the fan in case of its outside installation.
  • The fan are designed for connection to Ø 100 mm air ducts.

DESIGN

  • The fan casing is made of polymer coated steel.
  • New technologies for manufacture of the fan components let attain the total casing air tightness.

MOTOR

  • The impellers with backward curved blades are powered with a high efficient electronically commutated (EC) direct current motor with external rotor.
  • As of today, such motor type is the most advanced solution for energy saving.
  • EC motors are featured by high performance and the best speed controllable range.
  • Premium efficiency reaching up to 90 % is the absolute advantage of electronically commutated motors.
  • The motors are equipped with ball bearings for longer service life of the fan (40 000 hours).
  • For precise features, safe operation and low noise, each turbine is dynamically balanced while assembly.
  • Motor ingress protection rating IP44.

SPEED CONTROL

  • The fan is controlled with the external control signal 0-10 V (air flow control as a function of temperature, pressure, smoke conditions and other parameters).
  • Should the control value get changed, the EC motor adjusts its speed and the fan boosts as much air flow to the ventilation system as required.
  • Maximum speed of the fan does not depend on the current frequency and it can operate at 50 or 60 Hz mains supply.
  • The fans may be integrated into the unified dispatch system.
  • The respective software enables to control all the fan integrated into the system.
  • The computer displays all the system parameters.
  • Each fan in the system may be individually adjusted.

MOUNTING

  • The fans may be installed at any angle.
  • The fixing brackets that are included into the delivery set are used to facilitate the fan mounting to the wall.
  • The fan is connected to power mains through the external terminal box.

Characteristics

Parameter VKM 100 EC Measurement unit
Low-powered motor no –
High-power version no –
Phase 1 ˜
Voltage 230 V
Frequency 50/60 Hz
Sound pressure level at 3 m distance 44 dBА
Air capacity 345 m³/h
Power consumption 90 W
Current 0.70 A
EC motor yes –
RPM 3600 min-1
Max. transported air temperature -25 +60 °С
Protection rating IP X4 –
Duct diameter 100 mm
Weight 3.45 kg
Design centrifugal –
Casing material polymer coated steel –
Outdoor mounting yes –
SEC Class B –
Duct for round air ducts –
Type supply and exhaust –
Mounting outdoor mounting, Inline –

Additional characteristics

Sound-power level, A – weighted Octave-frequency band [Hz] LpA, 3 m [dBА] LpA, 1 m [dBА]
Hz Gen. 63 125 250 500 1000 2000 4000 8000
LwA to inlet dBА 90 66 82 89 80 74 70 63 51 70 80
LwA to outlet dBА 89 73 82 88 79 70 66 61 49 69 79
LwA to environment dBА 65 31 47 56 60 59 58 47 33 44 54

Dimensions

Parameter Value Measurement unit
∅D 98 mm
ØD1 255 mm
B 310 mm
B1 270 mm
H 340 mm
L 203 mm
L1 20 mm
L2 25 mm
L3 30 mm

vkm ec dimensions 2502 Inline centrifugal fan with the air flow up to 345 m³/h in steel casing. EC-motors, high level of efficiency 100% speed controllable EC technology is intelligent technology; using integral electronic control which eliminates the slip losses in the motor and ensures that the motor always runs at optimal load. This guarantees that the proportion of energy utilized effectively is many times higher and the energy usage considerably lower compared with AC motors. EC fans are notable for their economical use of energy and excellent ease of control. They can be varied in speed to match the airflow demand, and operate at high efficiency levels. For the same air volume, they consume distinctly less energy than AC fan drives. Another special feature of EC fans is their energy-saving potential not only at full load, but especially at part-load. When operating at part-load, the energy used is much lower than with an asynchronous motor of equivalent output. Reduced energy usage guarantees a drop in operating costs.

Related products

  • VKM 315 EC

    Read more

  • VKM 200 EC

    Read more

  • VKM 150 EC

    Read more

  • VKM 125 EC

    Read more

Support All The Way

If you have trouble figuring out which products or solutions fits you the best, contact us! We support you all the way. 

Contact

Ventpro Solution Co,.Ltd

NEWS / INFO SIGN UP TO DO HERE

  • Ventpro Solution Co,.Ltd
Privacy Policy

Seeking residential ERV Ventilation system?

To create optimal quality systems, we personalize our ERV ventilation solutions. 

Fill in the form to get personal guidance 

We create Europeean ERV Solutions. 

Fill in the form to get personal guidance

Looking for ERV Residential Ventilation?

Creating the optimal solution for you requires knowledge of your specific situation. 

Book a free guidance call below